显示标签为“buildings”的博文。显示所有博文
显示标签为“buildings”的博文。显示所有博文

2016年6月27日星期一

[ Wiki ]THE FOUR TYPES OF STEEL


4-steel-typesour customers will ask us about the different types of steel we sell, and what to look for when picking steel grades, shapes and sizes. While there are many ways to categorize steel, we find it useful to break steel down into four categories (Carbon, Alloy, Stainless andTool Steel). In this four-part blog series, we take an in-depth look at some of the most common categories of steels, what makes them different, and what to consider when deciding which type of steel is right for you.

Steel Categories

According to the American Iron & Steel Institute (AISI), Steel can be categorized into four basic groups based on the chemical compositions:
  1. Carbon Steel
  2. Alloy Steel
  3. Stainless Steel
  4. Tool Steel
There are many different grades of steel that encompass varied properties. These properties can be physical, chemical and environmental.
All steel is composed of iron and carbon. It is the amount of carbon, and the additional alloys that determine the properties of each grade.

Classifications

Types of Steel can also be classified by a variety of different factors:
  1. Composition: Carbon range, Alloy, Stainless.
  2. The production method: Continuous cast, Electric furnace, Etc.
  3. Finishing method used: Cold Rolled, Hot Rolled, Cold Drawn (Cold Finished), Etc.
  4. Form or shape: Bar, Rod, Tube, Pipe, Plate, Sheet, Structural, Etc.
  5. De-oxidation process (oxygen removed from steelmaking process): Killed & Semi-Killed Steel, Etc.
  6. Microstructure: Ferritic, Pearlitic, Martensitic, Etc.
  7. Physical Strength (Per ASTM Standards).
  8. Heat Treatment: Annealed, Quenched & Tempered, Etc.
  9. Quality Nomenclature: Commercial Quality, Drawing Quality, Pressure Vessel Quality, Etc.

Steel Numbering Systems

There are two major numbering systems used by the steel industry, the first developed by the American Iron & Steel Institute (AISI), and the second by the Society of Automotive Engineers (SAE). Both of these systems are based on four digit code numbers when identifying the base carbon and alloy steels. There are selections of alloys that have five digit codes instead.
If the first digit is a one (1) in this designation it indicates a carbon steel. All carbon steels are in this group (1xxx) in both the SAE & AISI system. They are also subdivided into four categories due to particular underlying properties among them. See below:
  • Plain Carbon Steel is encompassed within the 10xx series (containing 1.00% Mn maximum)
  • Re-Sulfurized Carbon steel is encompassed within the 11xx series
  • Re -Sulfurized and Re-Phosphorized Carbon Steel is encompassed within the 12xx series
  • Non-Re-Sulfurized High-Manganese (up-to 1.65%) carbon steel is encompassed within the 15xx series.
The first digit on all other alloy steels (under the SAE-AISI system), are then classified as follows:
2 = Nickel steels.
3 = Nickel-chromium steels.
4 = Molybdenum steels.
5 = Chromium steels.
6 = Chromium-vanadium steels.
7 = Tungsten-chromium steels.
8 = Nickel-chromium-molybdenum steels
9 = Silicon-manganese steels and various other SAE grades
The second digit of the series (sometimes but not always) indicates the concentration of the major element in percentiles (1 equals 1%).
The last two digits of the series indicate the carbon concentration to 0.01%.
For example: SAE 4140 indicates a molybdenum steel alloy, containing 1% of molybdenum and 0.40% of carbon.

Carbon Steel

Carbon Steel can be segregated into three main categories: Low carbon steel (sometimes known as mild steel); Medium carbon steel; and High carbon steel.
Low Carbon Steel (Mild Steel):  Typically contain 0.04% to 0.30% carbon content. This is one of the largest groups of Carbon Steel. It covers a great diversity of shapes; from Flat Sheet to Structural Beam. Depending on the desired properties needed, other elements are added or increased. For example: Drawing Quality (DQ) – The carbon level is kept low and Aluminum is added, and for Structural Steel the carbon level is higher and the manganese content is increased.
Medium Carbon Steel: Typically has a carbon range of 0.31% to 0.60%, and a manganese content ranging from .060% to 1.65%. This product is stronger than low carbon steel, and it is more difficult to form, weld and cut. Medium carbon steels are quite often hardened and tempered using heat treatment.
High Carbon Steel: Commonly known as “carbon tool steel” it typically has a carbon range between 0.61% and 1.50%. High carbon steel is very difficult to cut, bend and weld. Once heat treated it becomes extremely hard and brittle.

[ Wiki ] TOP STEEL TUBING APPLICATIONS



_____________    CONTACT US   _____________


Holly Zhang

E-mail: sales4@sunraysteel.com

Mob: 86-13417960037 / Tel: 86-0757-63999952

Skype: hollyzhang97

Facebook: https://www.facebook.com/zhang.holly.5

Address: 1507, A6, Hao Science Park, Guicheng, Nanhai District, Foshan, Guangdong, China.





----------------------------------    WWW.SUNRAYSTEEL.COM   -----------------------------------


Steel tube is strong, tough and durable. It can be round, square or rectangular. Steel tubing often incorporates different alloys such as aluminum, manganese, titanium and tungsten. Its versatility lends it to a range of applications in different industries. Each year millions of tonnes of steel tubing is produced.Steel rectangular tube
Steel tubing can be welded or seamless. Seamless tubes are made by passing the molten steel over a piercing rod to create a hollow tube. Welded tubes are made from curling a rolling plate and welding the seam together. In the past, seamless tubes were stronger than welded tubes. However advances in technology have allowed welded tubes to have sufficient strength to replace welded tubes for many applications.
Steel tubes are widely used in industrial and domestic settings.  In industry, steel tubes are valued for their strength and ability to withstand extremes of temperature, pressure and destructive elements. In domestic settings, steel tubes are used in appliances and gas pipes. If you look behind your refrigerator you’ll likely see some steel tubing.
Here are some top steel tube applications:

Construction and engineering

The construction and engineering industries use hollow structural sections (HSS). HSS is a form of steel tubing and is commonly circular, square or rectangular. In the UK the term HSS is not used. Instead the basic shapes are named CHS (circular), SHS (square) and RHS (rectangular).
Rectangular HSS are commonly used in welded steel frames which are subjected to loading from different directions. Square and circular HSS are often used as columns.
In construction, metal scaffolding made from steel is the industry standard. As no nuts and bolts are required, assembly is quick and easy. Steel scaffolding can transport workers and heavy equipment with ease.

Automobile manufacture

The automobile industry has been using steel tubes in ever increasing quantities since the early ‘90s.
Precision steel tubes are used in the internal parts of the vehicle: in the suspension, fuel injection and vehicle control systems.